Material: bumper corners are in high quality GRP (glass-reinforced plastic)
will fit all 964 models from 1989-1993
rear bumper in 911 2.5 ST look for converting a Porsche 964 to the classic F-model-look of the 911 ST (=Singer-wide)
this bumper consists of three individual parts (GRP bumper corners left+right and steel middle part) which are attached to each other in combination with our adapter brackets
the chrome overriders are screwed to the center panel and the adapter brackets
when installing this bumper, the rear fenders must be widened to 911 2.5 ST
bumper comes standard without exhaust cutouts so that the cutouts can be made to fit your custom-made exhaust system - this bumper is NOT suitable for use in combination with the standard exhaust system, you will need a specially made muffler for this conversion
Parts are new aftermarket (not OEM) and come NOT primed and NOT painted (we don't offer painting). Parts are made of GRP (fibreglass) or CFRP (carbon fibre) (see "Material"). Knowledge of properties of GRP/CFRP is required for correct installation of these body parts. By purchasing these parts you accept that they may require minor adaptation/modification/trimming to fit. Mounting kit and fitting instructions are not included. No additional equipment is included such as stop or fog lights/grills/badges, unless otherwise stated in the description above. Parts require professional fitting. Parts need to be trial fitted before priming and painting in order to check fitment and eventual necessary modifications. Parts are not finished and they must be prepared before priming (sanding/filling/priming).
