Backdate rear bumper support 911 / 930 for multi-piece bumper

Adjustable support for backdate rear bumper

For multi-part rear bumpers, both for the variant with a GRP bumper center section and two bumper corners, as well as for the combination of two bumper corners with a steel bumper center section. 

The brackets are adjustable in all directions left/right, front/rear and top/bottom and enable simple adaptation to the vehicle, taking into account many adjustment options. The holder for the chrome horn can also be adjusted radially, allowing the chrome horns to be aligned vertically.

The end of the holder, which is fitted to the corners of the bumpers, is provided with three oversized holes so that the individual corners can also be aligned. The corresponding aluminum mounting brackets with screws are supplied loose so that they can be glued into the bumper corners during installation/alignment.

The holders can be used with all 911/930 G models. They are attached to the baffle tube mount.

The brackets are made of aluminum and are powder-coated.

Note:
With the multi-part rear bumper bars, the chrome horns can be fitted over the GRP horns and glued. Alternatively, the GRP horns can also be painted in the body color. With the steel center section, our Backdate holders allow the original chrome horns to be fitted, just like on a standard vehicle.

The same backdate holders are also available for all 964/965 models.