Backdate rear bumper with rear center panel in aluminium for 911G '74-'89 to 911 2.8 RSR conversion

Material: bumper corners are in high quality GRP (glass-reinforced plastic)

will fit all 911 G-models from 1974-1989

rear bumper in 911 2.8 RSR look for converting a Porsche 911 G-model to the classic F-model-look of the 911 2,8L RSR

this bumper consists of three individual parts (GRP bumper corners left+right and aluminium middle part) which are attached to each other in combination with our adapter brackets

the chrome overriders are screwed to the center panel and the adapter brackets

when installing this bumper, the rear fenders must be widened to 911 2.8 RSR

bumper comes standard without exhaust cutouts so that the cutouts can be made to fit your custom-made exhaust system - this bumper is NOT suitable for use in combination with the standard exhaust system, you will need a specially made muffler for this conversion

Parts are new aftermarket (not OEM) and come NOT primed and NOT painted (we don't offer painting). Parts are made of GRP (fibreglass) or CFRP (carbon fibre) (see "Material"). Knowledge of properties of GRP/CFRP is required for correct installation of these body parts. By purchasing these parts you accept that they may require minor adaptation/modification/trimming to fit. Mounting kit and fitting instructions are not included. No additional equipment is included such as stop or fog lights/grills/badges, unless otherwise stated in the description above. Parts require professional fitting. Parts need to be trial fitted before priming and painting in order to check fitment and eventual necessary modifications. Parts are not finished and they must be prepared before priming (sanding/filling/priming).