Set 2x threaded sleeve damper strut shock absorber conversion to Bilstein B6 for Porsche 944 S2/Turbo 968

Here you get threaded sleeves for the conversion of two standard shock absorber legs of the Porsche models 944 S2 and 968. They allow the use of Bilstein B6 shock absorbers.

How to proceed:

1. chisel open the grouting of the old shock absorber parts and pull out the damper cartridges

2. shorten the tubes by 44.5mm

3. remove the zinc coating from the threaded sleeves in the welding area

4. carefully drive the threaded sleeves into the tubes and weld well all around (Before welding, check that the gap between the tube and threaded sleeve fits. It must be possible to tighten the damper cartridge with the nut with 5 full turns)

5. grind the weld seam smooth, paint and assemble the shock absorber